Rips in the surface of your pool table can be very frustrating. There can be a small rip and it makes playing on it an interesting challenge. This means that, to not be accused of rigging the game in your favor, the felt should be repaired or replaced. A professional firm can do this pool table refelting and they will make sure it is right.
If it is a small rip, it can be repaired by you with a lot of patience and a good quality adhesive. A very sharp knife will also be needed as well as some sandpaper. Measuring the hole, cutting the felt and making sure it fits will take attention to detail. Just the right amount of glue will also not be easy to judge. But, again, looks are not as important as how it might effect the game.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
The professionals will arrive and get right to work. The measurements will be taken to make sure they have adequate felt of the proper color. The rails will need to be removed to reveal the old staples, which will have to be removed as well. The old glue must come off and the surface prepped to receive the new adhesive.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
Disassembled rails are covered and reinstalled. Since the pool table is more than just good looks, a proper refelting job is more than important. Making sure the enjoyment of this game piece continues is what this is all about. Bragging rights for your selection of a interesting color or design is also in the offing.
If it is a small rip, it can be repaired by you with a lot of patience and a good quality adhesive. A very sharp knife will also be needed as well as some sandpaper. Measuring the hole, cutting the felt and making sure it fits will take attention to detail. Just the right amount of glue will also not be easy to judge. But, again, looks are not as important as how it might effect the game.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
The professionals will arrive and get right to work. The measurements will be taken to make sure they have adequate felt of the proper color. The rails will need to be removed to reveal the old staples, which will have to be removed as well. The old glue must come off and the surface prepped to receive the new adhesive.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
Disassembled rails are covered and reinstalled. Since the pool table is more than just good looks, a proper refelting job is more than important. Making sure the enjoyment of this game piece continues is what this is all about. Bragging rights for your selection of a interesting color or design is also in the offing.
No comments:
Post a Comment